The UT18E is designed for testing AC/DC voltage (up to 1000V),...
UT12 series non-contact AC voltage detectors are widely used in the...
UT665 borescope displays clear images through a flexible camera probe....
UT681 series handheld cable testers can be used to fast check if...
UT620 series are used to measure DC low resistance through 4-wire...
UT210 series mini clamp meters are designed to work well in limited...
The UT890D+ 6000-count true RMS digital multimeters are designed with...
This instrument is a portable multimeter designed for the measurement of...
UTi716S is equipped with a 12μm infrared detector with 160×120 pixels...
UTi120B is a rugged and ergonomically designed thermal camera, powerful...
The battery internal resistance tester is a measuring instrument used to...
UT620C+ can measure a wide range of resistance values with high...
UT336A is a negative corona electronic refrigerant leak detector,...
UT330TH USB Dataloggers use high-precision temperature and humidity...
UT325F 4-Channel Thermometer is a high- accuracy digital thermometer...
UT200+ series handheld automatic range true RMS clamp meter, designed...
The UNI-T UTi720V is a handheld IR thermal camera from the UTi700V...
UTi640J is a new handheld thermal camera released in 2024. It is a...
UTi384J supports 384×288 pixel high resolution sensor, wide temperature...
The UTP1300 Series power supply is an economical switching type DC...
No supplier
This is a digital AC clamp meter designed for measurement of low-voltage circuits in the application range of 1000V CAT.III, 600V CAT.IV. It is suited to current and voltage measurement of power lines, electrical equipment, and electrical facilities less than 1000Vrms to ground. ●The CT shape makes it easier to clamp cable in crowded. ●True RMS reading... This is a digital AC clamp meter...
This instrument is an AC clamp meter/digital multimeter of the RMS value response type, designed for measurementsin the range specified by IEC61010-2-032 CAT.III 600V. It is suitable for current and voltage measurements of low-voltage circuitry, electric equipment and power supply facilities. ● AC current measurable max. 660A & DMM function● True RMS●... This instrument is an AC clamp...
This instrument is an AC/DC clamp meter/digital multimeter of the RMS value response type,designed for measurementsin the range specified by IEC61010-2-032 CAT.III 600V. It is suitable for current and voltage measurements of low-voltage circuitry,electric equipment and power supply facilities. ● AC/DC current measurable max. 600A & DMM function● True... This instrument is an AC/DC clamp...
This meter is useful for measuring the current of electrical lines, appliances and power supply facilities operating on low voltages in the ranges of CAT. III environment. ● True RMS● Low cost & DMM functions● Data hold function Ex-stock subject to prior sales, otherwise lead time 6 to 8 weeks This meter is useful for measuring...
This instrument is a TRUE RMS AC clamp meter designed in compliance with IEC61010-1 CAT.IV 600V. It is suitable for measuring the current of electrical lines, appliances power supply facilities operating on low voltages of no more than 600V. ● AC current measurable max. 3000A. Maximum overload protection input AC5000A.● True RMS● Large LCD with Back... This instrument is a TRUE RMS AC...
The Model 2110 5½-Digit Dual-Display Digital Multimeter combines a compelling price with a comprehensive set of capabilities, superior measurement accuracy, and high speed for a broad range of applications. It features 15 measurement functions and 7 math functions and has dual-line display capability, which allows it to display two different measurements... The Model 2110 5½-Digit Dual-Display...
Series 2220 and 2230 Multi-Channel Programmable DC Power Supplies are ideal for testing a wide range of devices, circuit boards, modules, and products that require multiple power sources cost-effectively. Series 2200 supplies provide two channels, each capable of outputting up to 30V and up to 1.5A. Series 2230 supplies include two 30V/1.5A channels plus... Series 2220 and 2230 Multi-Channel...
The Model 2231A-30-3 Triple Channel DC Power Supply can output a total of 195W of power, providing the power levels needed to energize a wide range of circuits and devices for benchtop work. Two channels can supply up to 30V at 3A each; the third channel can provide up to 5V at 3A. The Model 2231A-30-1 does not compromise on performance or convenience... The Model 2231A-30-3 Triple Channel...
Ex-stock subject to prior sales, otherwise lead time 6 to 8 weeks Ex-stock subject to prior sales,...
The CP2100 series is a current probe that can measure both DC and AC. It adopts split design and has small and beautiful appearance. It uses a standard BNC interface and is suitable for oscilloscopes. It can also be used for multimeters via connector. The maximum current can be measured to 100Apk (70Arms); it has 2 models: CP2100A and CP2100B, CP2100A can... The CP2100 series is a current probe...
The CP2100 series is a current probe that can measure both DC and AC. It adopts split design and has small and beautiful appearance. It uses a standard BNC interface and is suitable for oscilloscopes. It can also be used for multimeters via connector. The maximum current can be measured to 100Apk (70Arms); it has 2 models: CP2100A and CP2100B, CP2100A can... The CP2100 series is a current probe...
Comparing all high-voltage differential probes in the market, you will find Micsig DP series is very cost effective. Lower price but even better performance than big brand. Many customers tested its quality. DP10007 is the newest product of DP series, it allows conventional earth-grounded oscilloscopes to be used for floating signal measurements of up to... Comparing all high-voltage...
Comparing all high-voltage differential probes in the market, you will find Micsig DP series is very cost effective. Lower price but even better performance than big brand. Many customers tested its quality. DP10007 is the newest product of DP series, it allows conventional earth-grounded oscilloscopes to be used for floating signal measurements of up to... Comparing all high-voltage...
Comparing all high-voltage differential probes in the market, you will find Micsig DP series is very cost effective. Lower price but even better performance than big brand. Many customers tested its quality. DP10007 is the newest product of DP series, it allows conventional earth-grounded oscilloscopes to be used for floating signal measurements of up to... Comparing all high-voltage...
Micsig STO2000C series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 280Mpts memory depth and maximum... Micsig STO2000C series smart...
Micsig STO2000C series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 280Mpts memory depth and maximum... Micsig STO2000C series smart...
Micsig STO1000E series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 70Mpts memory depth and maximum... Micsig STO1000E series smart...
Micsig STO1000E series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 70Mpts memory depth and maximum... Micsig STO1000E series smart...
Micsig STO1000 series smart oscilloscopes adopt the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, which brings you a new user experience. It is not a traditional bench oscilloscope any more, big capacity lithium is a really good choice in filed using. Up to 28Mpts memory depth and maximum... Micsig STO1000 series smart...
Micsig Tablet Oscilloscope Smart series STO1000 adopts the newest integrated touch screen technology and newly upgraded hardware and software system, it features 4 analog channels, available with 100MHz bandwidth, single channel has maximum 1G Sa/s sampling rate and 70Mpts of memory depth, waveform capture rate up to 130,000 wfms/s.With a large 8-inch,... Micsig Tablet Oscilloscope Smart...