The UT18E is designed for testing AC/DC voltage (up to 1000V),...
UT12 series non-contact AC voltage detectors are widely used in the...
UT681 series handheld cable testers can be used to fast check if...
UT620 series are used to measure DC low resistance through 4-wire...
UT210 series mini clamp meters are designed to work well in limited...
The UT890D+ 6000-count true RMS digital multimeters are designed with...
This instrument is a portable multimeter designed for the measurement of...
The UTP1300 Series power supply is an economical switching type DC...
UTi740H is a professional enhanced thermal camera that specially...
V series features a 5MP digital camera and 3.5′ touch display screen to...
UTi722M transforms your smartphone into a thermal camera instantly. Its...
UTi721M is a professional thermal camera module for smartphones, which...
UTi720M is a professional thermal camera module for smartphones, which...
UTi720E is an advanced thermal camera with Wi-Fi capability. Its large...
UTi384G is a professional enhanced thermal cameras that specially...
UTi256G is a professional enhanced thermal camera that specially...
UT210 series mini clamp meters are designed to work well in limited...
UT200A+ AC current digital clamp meters are suitable for daily repair...
UTi730E is an advanced thermal camera with Wi-Fi capability. Its large...
No supplier
The 95X Series combines high output power, with a wide range of AC & DC voltage outputs and extremely low leakage current measurement. Then we added a 4-wire milli-ohmmeter with dynamic range up to 100K ohms and an overlapping Tera-ohm class Insulation Resistance function. Top that off with an available 40 Amp Ground Bond capability and you’re just... The 95X Series combines high output...
The Keithley 6517B Electrometer/High Resistance Meter is the worldwide research laboratory standard forsensitive measurements. With over 60 years of low level measurement expertise, Keithley electrometers providereliable measurements of current levels down to 10 aA (10×10–18 A), charge levels down to 1 fC, and the highest resistance measurements available... The Keithley 6517B Electrometer/High...
The Model 6514 Electrometer combines flexible interfacing capabilities with current sensitivity, charge measurement capabilities, resolution, and speed that are equal or superior to our earlier electrometers. The Model 6514’s built-in IEEE-488, RS-232, and digital I/O interfaces make it simple to configure fully automated, high speed systems for low-level... The Model 6514 Electrometer combines...
The Model 6220 DC Current Source and Model 6221 AC and DC Current Source combine ease of usewith exceptionally low current noise. Low current sourcing is critical to applications in test environmentsranging from R&D to production, especially in the semiconductor, nanotechnology, and superconductorindustries. High sourcing accuracy and built-in control... The Model 6220 DC Current Source and...
The Model 6220 DC Current Source and Model 6221 AC and DC Current Source combine ease of usewith exceptionally low current noise. Low current sourcing is critical to applications in test environmentsranging from R&D to production, especially in the semiconductor, nanotechnology, and superconductorindustries. High sourcing accuracy and built-in control... The Model 6220 DC Current Source and...
The Model 6482 Dual-Channel Picoammeter/Voltage Source provides two independent picoammeter/voltage source channels for a wide range of low-level measurement applications that require dual-channel measurements. Building off of the proven measurement capabilities of Keithley’s Model 6485 5½-digitPicoammeter, the Model 6482 adds higher measurement... The Model 6482 Dual-Channel...
The 5½-digit Model 6487 Picoammeter/Voltage Source improves on the measurement capability of the award-winning Model 6485, and adds a high resolution 500V source. It provides higher accuracy and faster rise times than the 6485, as well as a damping function for use with capacitive devices. With eight current measurementranges and high speed autoranging,... The 5½-digit Model 6487...
The 5½-digit Model 6485 Picoammeter combines Keithley’s expertise in sensitive current measurement instrumentation with enhanced speed and a robust design. With eight current measurement ranges and high peed autoranging, this costeffective instrument can measure currents from 20fA to 20mA, taking measurements at speeds up to 1000 readings per second. The... The 5½-digit Model 6485 Picoammeter...
The DMM7510 combines all the advantages of a precision digital multimeter, a graphical touchscreen display, and a high speed, high resolution digitizer to create an industry first: a graphical sampling multimeter. The digitizer gives the DMM7510 unprecedented signal analysis flexibility; the five-inch capacitive touchscreen display makes it easy to... The DMM7510 combines all the...
The DMM6500 is a modern bench/system DMM delivering more measurement functionality, best-in-classmeasurement insight, and a price that will not break your budget. The most recognizable feature of the DMM6500is the large 5-inch (12.7 cm) capacitive touch screen display that makes it easy to observe, interact with, andexplore measurements with “pinch and... The DMM6500 is a modern bench/system...
The 2100 Series USB Multimeter combines high measurement basic accuracy (0.0038% ) with 6½-digit resolution and a price often associated with 5½ -Digit DMMs. This DMM features 11 measurement functions and 8 math functions to accommodate the most commonly-measured parameters. All accessories, such as USB cable, probes, and software, are included with this... The 2100 Series USB Multimeter...
With its 1100 V and 10 fA capability, the 2470 High Voltage SMU is optimized for characterizing and testing high voltage, low leakage devices, materials, and modules, such as silicon carbide (SiC), gallium nitride (GaN), power MOSFETs, transient suppression devices, circuit protection devices, power modules, batteries, and much more. Wide coverage up to... With its 1100 V and 10 fA capability,...
With its 10 A/1000 W pulse current and 7 A/100 W DC current capability combined with dual 18-bit 1MS/s digitizers, the 2461 High Current SMU is optimized for characterizing and testing high power materials, devices, and modules, such as silicon carbide (SiC), gallium nitride (GaN), DC-DC converters, circuit protection devices, solar cells and panels, high... With its 10 A/1000 W pulse current...
The 2460 High Current SourceMeter® Source Measure Unit (SMU) Instrument with its 7A DC and pulse current capability is optimized for characterizing and testing high power materials, devices, and modules such as silicon carbide (SiC), gallium nitride (GaN), DC-DC converters, power MOSFETs, solar cells and panels, LEDs and lighting systems, electrochemical... The 2460 High Current SourceMeter®...
Series 2300 battery simulating power supplies can simulate both a battery's output resistance and output voltage response. The dual-channel versions of these power supplies provide one channel to act like a battery and sink current for simulating a discharged rechargeable battery; the other channel supplies voltage for testing a device’s charge control... Series 2300 battery simulating power...
Series 2300 battery simulating power supplies can simulate both a battery's output resistance and output voltage response. The dual-channel versions of these power supplies provide one channel to act like a battery and sink current for simulating a discharged rechargeable battery; the other channel supplies voltage for testing a device’s charge control... Series 2300 battery simulating power...
Series 2300 battery simulating power supplies can simulate both a battery's output resistance and output voltage response. The dual-channel versions of these power supplies provide one channel to act like a battery and sink current for simulating a discharged rechargeable battery; the other channel supplies voltage for testing a device’s charge control... Series 2300 battery simulating power...
Series 2300 battery simulating power supplies can simulate both a battery's output resistance and output voltage response. The dual-channel versions of these power supplies provide one channel to act like a battery and sink current for simulating a discharged rechargeable battery; the other channel supplies voltage for testing a device’s charge control... Series 2300 battery simulating power...
The 2281S-20-6 Dynamic Battery Simulator and Precision DC Bench Power Supply with TFT LCD display uses a model to emulate the response of a battery over its discharge cycle. Since the model can be based on the average current of the product that the battery will power, you can estimate battery life and analyze product performance over the life of the... The 2281S-20-6 Dynamic Battery...
Series 2280S supplies deliver up to 192W of low output noise power and superior load current measurement sensitivity. Built-in plotting functions allow monitoring trends such as drift. These supplies offer up to 6½-digit resolution for characterizing small changes in load currents with confidence. Four load current measurement ranges support measuring a... Series 2280S supplies deliver up to...